IPMI commands for CMM

(1) stop the CMM I2C polling:

impitool -H 192.168.100.xxx -U ADMIN -P ADMIN raw 0x30 0x40 6

(2) Read one byte from second blade:

impitool -H 192.168.100.xxx -U ADMIN -P ADMIN raw 0x30 0x37 0x31 0x22 0x01 0x01 0x00 0x01

impitool -H 192.168.100.xxx -U ADMIN -P ADMIN raw 0x30 0x37 0x31 0x22 (slave address) 0x01 (bus#)  0x01 (channel#)  0x00 (offset) 0x01 (how many bytes)

Advertisements

About superjameszou

Hardware Design Engineer
This entry was posted in IPMI. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s